May 24, 2012
Michael & Christine Di Paulo, CDT · Owner/Ceramist at Di Paulo Dental Ceramic Studio
Joe : I used lamps from Duro-Test with a CRI (color rendition index ) of 94. You should look for lamps...See more as close to CRI 100 as possible (CRI 100= sunlight). It should also be noted that lamps lose lumins through use so don't wait for them to burn out, they should be replaced yearly , working or not. Also I was advised not to use diffusers (grills ) of any kind.
Hope this helps.
Joseph Young · Marketing Manager at Young Dental Lab
Thanks for the info guys. So for general lighting, I'm going to research replacing the stock lenses with...See more chrome grills to start. Over our porcelain benches (Kavo Masterspace), I'll have to research the output from their specs and see if there's a replacement or upgrade to full spectrum.
Mark, is that Northern Light Technologies? I may consider an operatory light for our custom shade visits too.
Thanks for your input!
Mark Jackson, RDT · Owner at Precision Ceramics Dental Lab
We are using color corrected bulbs in the range you are, but we augment by only using the operatory with...See more northern light. Additionally, we take pictures with shade tabs and use the Vita Easy Shade. Between all of these things we get pretty close. I don't think only one, or even two of them alone will do the job. If you call the bulb manufacturer, they may have a local rep who can come to your lab with instruments and advice on choosing surface lighting..that's what we did, and the salesman can over to see us.
One thing we did, was remove the flosted plastic lenses on the fixtures and replace them with chrome grills, and we also put mylar tape behind the bulbs to reflect more light downward, and offset the white paint in the box. All of these suggestions came from that technical rep who visited us.