• Mark Siegel, CDT/TE CAD/CAM Technicians

    Does anyone have thoughts on Zirkonzahn?

    May 30 at 3:10 pm · 1

    Exocad based and you could get similar results with an open architecture system from 3shape, DW, or any...See more

  • Alisa & Joe Sofinski CAD/CAM Technicians

    We had Sirona in lab rap in our lab lest Wednesday. We loved what we heard but not sure if we would make right choice by just going w them or shopping other system. What we like the most is that we would be able to do all staps ourselves from reciving files (just from cerec-ussers since they are closed...

    November 19, 2013 · 4

    Be careful what is stated to you -
    if I were in your shoes I would purchase a medit scanner with exocad...See more

  • Marc Daichman CAD/CAM Technicians

    Is there a website or directory to go to that compares all the open archetecture scanners (&milling machines if available) along with prices??? And what feedback does anyone have with open architecture scanners(besides the #1 3-shape)???? thanks!

    April 23, 2012 · 9

    The comment was directed towards the smaller milling machines that are being marketed to cut zirconia...See more

  • Marc Daichman CAD/CAM Technicians

    Is there a website or directory to go to that compares all the open archetecture scanners (&milling machines if available) along with prices??? And what feedback does anyone have with open architecture scanners(besides the #1 3-shape)???? thanks!

    April 23, 2012 · 9

    I thought LMT produces a guide in one of their issues with a comparison- the challenge now is what is...See more

  • Lee Coursey Dental Implant Technicians

    Hello everyone. I'm a third generation dental technician. I work predominantly with implants creating supporting structures for final appliances. We are a heavy Nobel Biocare lab, but we restore on dozens of different brands and platforms each year. I'm also heavily involved with the restoration...

    February 27, 2012 · 7

    Hi Lee- I own Implant Depot.com and we have a full line of restorative parts for All On Four for Zimmer,...See more

  • Richard Wills, CDT Dental Implant Technicians

    Glad to see we have this resource for information and networking!! I went to Chicago Lab Day last weekend looking for information on a scanner to purchase for my All-on-4 cases I am starting to do, and I might be more confused now than before I went. Not sure wheather to go with a 3Shape or a Nobel....

    March 4, 2012 · 5

    go with 3shape- i worked for nobel and also the company that built the new nobel scanner - open architecture...See more

  • What information is your custom abutment milling center providing you on the materials and screws?

    The goal of this is to learn from our experiences how to avoid these types of companies.

    We recently...See more

  • Impression Scanning Recommendations?

    Is anyone out there using impression scanning at their lab and how are the models coming out? Which system? Models printed or milled? Have you compared them to the same impression poured by your traditional...

    we used the dental wings impression scanner at reliable dental lab and then had the models printed on...See more

Show More