New Techniques for Valplast® Flexible Partials: CAD/CAM Technology Overview, Design Essentials, and Easy Finishing and Polishing

From Valplast International Corp.

Pre-registration is recommended by calling 800-843-2861. For information, email the Communications Department at [email protected]

Note: This seminar is from a past LAB DAY show

Justin Marks, CDT, explores and demonstrates the latest techniques to achieve optimal results with Valplast Flexible Partials. He focuses on use of CAD/CAM technology for design, virtual preparation and wax modellation leading to a 3D printed prototype of the appliance.

Pre-registration is recommended.

Credits
Approved for 2 Scientific credits

Session

Saturday · Saturday 8:00am - 10:00am
Hermosa Suite, 2nd Floor

Speaker

Justin Marks

VP Clinical Operations at ResetSmile · Englewood Cliffs, NJ

I make teeth and 3D print things.

About The Host

Valplast International Corp.

Valplast®. Because Quality Matters.

Related Seminars

See All

Hands-On Workshop: CAD for Valplast®

Valplast International Corp.

1 Scientific credit · Justin Marks, CDT, engages technicians in hands-on learning and practice in the latest Valplast techniques. He provides hands-on experience using digital design tools for preparing...
Hands-On Workshop: Hands-On Finishing and Polishing Valplast® Flexible Partials

Valplast International Corp.

1 Scientific credit · Justin Marks, CDT, provides technicians with hands-on interactive practice of the new Valplast finishing and polishing technique. The latest techniques focus on efficiency and quality,...
Incorporating Digital Impressions into the Partial Denture Lab

Valplast International Corp.

2 Scientific credits · Justin Marks, CDT, discusses how modern digital technologies can be used to treat the partially edentulous patient with both Valplast® and traditional chrome-cobalt RPDs. He draws...