Cementation

Topic (Crown and Bridge)

Events
  • September
  • Sep4-5
    Introduction to IPS E.max Press Technology

    Seminars/Clinics · Implant Esthetics Center of Excellence (Sarasota)

    Introduction to IPS e.max Press Technology The Fundamentals of Press Technology Course covers the fundamentals of the IPS e.max technique including IPS e.max components for pressing (IPS e.max Press and IPS e.max ZirPress) and IPS e.max Ceram for the Cutback and Layering Techniques. Additional topics...

    Sarasota, FL
    Sep 4-5
  • Sep8-9
    Introduction to Scanning and Designing (two-day Course)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Mississauga, CAN
    Sep 8-9
  • Sep8-10
    Introduction to the ZenoTec mini Milling System

    Seminars/Clinics · Wieland (Troy)

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Troy, MI
    Sep 8-10
  • Sep8-10
    Introduction to the ZenoTec Mini Milling System

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Mississauga, CAN
    Sep 8-10
  • Sep15-16
    Master e.max Technology with Jurgen Seger Featuring IPS e.max Ceram

    Ivoclar Center for Dental Education (Amherst)

    Esthetic excellence for multiple all-ceramic restorations The IPS e.max all-ceramic system permits us superior management of light and color to mimic the natural dentition. Nevertheless comprehensive skills on the materials and adequate experience with the fabrication of high-strength all-ceramic restorations...

    Amherst, NY
    Sep 15-16
  • Sep18-19
    Master e.max Technology with Jurgen Seger Featuring IPS e.max Ceram

    Esthetic excellence for multiple all-ceramic restorations The IPS e.max all-ceramic system permits us superior management of light and color to mimic the natural dentition. Nevertheless comprehensive skills on the materials and adequate experience with the fabrication of high-strength all-ceramic restorations...

    Mississauga, CAN
    Sep 18-19
  • Sep18-19
    Introduction to IPS E.max Press Technology

    Meetups · LVI Las Vegas

    The Fundamentals of Press Technology Course covers the fundamentals of the IPS e.max technique including IPS e.max components for pressing (IPS e.max Press and IPS e.max ZirPress) and IPS e.max Ceram for the Cutback and Layering Techniques. Additional topics covered are: patient-dentist-laboratory communication...

    Las Vegas, NV
    Sep 18-19
  • Sep22-23
    Introduction to Scanning and Designing (two-day Course)

    Seminars/Clinics · Wieland (Troy)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Troy, MI
    Sep 22-23
  • Sep25
    Introduction to Stain & Glaze Techniques For Dental Offices

    Seminars/Clinics · Interdisciplinary Dental Education Academy (San Francisco)

    One of the biggest challenges in today’s CAD/CAM practice is to produce anterior restorations that are not only functionally correct, but also esthetically pleasing. The objectives of the course are to provide theoretical and hands-on training in staining and glazing techniques of chairside ceramics...

    Foster City, CA
    Thursday Sep 25
  • October
  • Oct2-3
    Smile Design Workshop Featuring IPS E.max - Korean

    Seminars/Clinics · Davinci Dental Studios

    Note: *This course is instructed in Korean* This two day e.max Workshop is designed to provide advanced layering concepts for individuals who are working with lithium disilicate restorations. This course, which features IPS e.max Press or CAD substructures, has been developed for ceramists that are experienced...

    Canoga Park, CA
    Oct 2-3
  • Oct3
    Introduction to Stain & Glaze Techniques For Dental Offices

    Seminars/Clinics · Ivoclar Center for Dental Education (Amherst)

    One of the biggest challenges in today’s CAD/CAM practice is to produce anterior restorations that are not only functionally correct, but also esthetically pleasing. The objectives of the course are to provide theoretical and hands-on training in staining and glazing techniques of chairside ceramics...

    Amherst, NY
    Friday Oct 3
  • Oct6-7
    Introduction to Scanning and Designing (two-day Course)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Mississauga, CAN
    Oct 6-7
  • Oct6-8
    Introduction to the ZenoTec mini Milling System

    Seminars/Clinics · Wieland (Troy)

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Troy, MI
    Oct 6-8
  • Oct6-8
    Introduction to the ZenoTec Mini Milling System

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Mississauga, CAN
    Oct 6-8
  • Oct9-10
    Introduction to IPS E.max Press Technology

    Seminars/Clinics · Ivoclar Center for Dental Education (Amherst)

    The Fundamentals of Press Technology Course covers the fundamentals of the IPS e.max technique including IPS e.max components for pressing (IPS e.max Press and IPS e.max ZirPress) and IPS e.max Ceram for the Cutback and Layering Techniques. Additional topics covered are: patient-dentist-laboratory communication...

    Amherst, NY
    Oct 9-10
  • Oct17
    Introduction to Scanning and Designing (two-day Course)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Mississauga, CAN
    Friday Oct 17
  • Oct20-21
    Introduction to Scanning and Designing (two-day Course)

    Seminars/Clinics · Wieland (Troy)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Troy, MI
    Oct 20-21
  • November
  • Nov3-4
    Introduction to Scanning and Designing (two-day Course)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Mississauga, CAN
    Nov 3-4
  • Nov3-5
    Introduction to the ZenoTec mini Milling System

    Seminars/Clinics · Wieland (Troy)

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Troy, MI
    Nov 3-5
  • Nov3-5
    Introduction to the ZenoTec Mini Milling System

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Mississauga, CAN
    Nov 3-5
  • Nov17-18
    Introduction to Scanning and Designing (two-day Course)

    Seminars/Clinics · Wieland (Troy)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Troy, MI
    Nov 17-18
  • December
  • Dec1-2
    Introduction to Scanning and Designing (two-day Course)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Mississauga, CAN
    Dec 1-2
  • Dec1-3
    Introduction to the ZenoTec Mini Milling System

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Mississauga, CAN
    Dec 1-3
  • Dec1-3
    Introduction to the ZenoTec mini Milling System

    Seminars/Clinics · Wieland (Troy)

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Troy, MI
    Dec 1-3
  • Dec15-16
    Introduction to Scanning and Designing (two-day Course)

    Seminars/Clinics · Wieland (Troy)

    This is specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific scanner that will be delivered to the customer, and as such the scanner set-up will be customized for each customer based on the specific scanner model and add-on modules...

    Troy, MI
    Dec 15-16
Show More