Abutments

Topic (Implants)

  • Can someone recommend a C & B casting investment that is good for implant abutments? I've used GC Fugivest...See more

  • Is there anyone familiar with designing custom abutments with Sirona's inLab 4.2? We are having an issue...See more

  • Jeff Jaje · Marketing & Business Development Manager at Sescoi USA

    Our Technical Director and bar milling expert will be at LMT Lab Days East, April 5th in booth R-2
    WorkNC...See more

  • Hello kent and everyone, I'm starting to hear about problems with zirconia abutments and fractures. I...See more — tagged Kent Kohli, CDT

  • Jim Erb, CDT · Lab & Marketing Consultant at ProLab Solutions, Inc.

    Hello all you Bridgers!
    We are only 9 days away from a very exciting 1 and 1/2 days of education, new...See more

  • Superior Surface Finishes
    Axsys Dental Solutions · Axsys Dental Solutions · Wixom, MI

    Whether its abutments, bars, bridges, individual or multi-unit restorations, the strength and rigidity...See more

  • Axsys Dental Solutions · Axsys Dental Solutions · Wixom, MI

    FDA Cleared Custom Milled Abutment Blanks
    Axsys is happy to announce an agreement with NT Trading to...See more

  • We can supply the custom abutments,milled implant bar,zirconia,milled crown with our CAD/CAM dept. What...See more

  • Jim Erb, CDT · Lab & Marketing Consultant at ProLab Solutions, Inc.

    Happy Holidays!
    Just two months until Lab Day Chicago 2014. Check out the Nov/Dec issue of LMT to see...See more

  • Jim Erb, CDT · Lab & Marketing Consultant at ProLab Solutions, Inc.

    Hello everyone. Just a short note to let you know I will be presenting a 1-hour scientific CDT credit...See more

  • Win an Apple iPad from DATRON!
    Come find us at booth #0-1 to chat about the DATRON D5 dental mill and...See more

  • Lars Hansson, CDT · Implant Specialist at Bay View Dental Lab, Inc.

    See you all at Lab Day West for some great information on Cad Cam Atlantis Abutments.

  • Alwyn Naraine, CDT · Managing Partner at Elite Dental Lab

    This is just me venting.. (in hopes of gaining manufacturers attention). It really frustrates me to know...See more

  • about Connectors

    Does anyone know how the shape of connectors for 3 unit PFM bridge be? especially teeth

    from #24...See more

  • What are your CAD/CAM suggestions for small labs?

    I am looking to buy a scanner but not sure about the software yearly fee. I looked into the D500 3Shape and 7S Dental Wings. A friend just told me about Identica from Medit blue light.

    exocad!! Medit scanners are great! Both the S.E. and the new Blue.


    We have used and sold over...See more


    Can make anything and has every single function of 3shape for 1/2 the cost over 5 year period.


    Scott @804-285-0777 (Dominion Milling Center and Prime Dental Products)


    Lowest price and best training. We run Seven Industrial mills and Foru rapid-prototype machines.


    We offer on-site milling of Ti Abutments and Bars and training for all exocad module.


    You will not find another reseller offering this. We are in Richmond, Va.


     

    — tagged Medit Corp.

  • Check out CMC's new anodized abutments!

    Anodized Abutments (Gold Hue)
    Consumables

    CMC is now offering Anodized Abutments (Gold Hue). Their gold anodization makes the abutment inside the crown less reflective (truer to a prescribed shade), resulting in more lifelike restoration. Pricing is $20.00 , from a file...

  • Randall Stone, CDT Design issue with custom abutments inLab 4.2

    Michelle, crazy problem- but a very simple solution. Remove the Ti-Base from the model, rotate it one notch, and re-assemble. It will line up perfectly. According to PTC, the software does this for milling purposes.

    August 5 at 9:32 am · 1

    Well after it's milled and twisted like that we pretty much have to rotate the ti-base. The problem...See more

  • Scott Hemmes Dental Implant Technicians

    Hello kent and everyone, I'm starting to hear about problems with zirconia abutments and fractures. I need to look into it a bit more, I haven't had any of mine come back for a remake. It seems to me there would be more trouble with the solid zirconia v.s the Ti base. Monolithic screw retained may be...

    October 14, 2013 · 2

    Dear Scott, Study's from Atlantis shows a consistent failure mode for Zir abutments is a misalignment...See more

  • Scott Hemmes Dental Implant Technicians

    Hello kent and everyone, I'm starting to hear about problems with zirconia abutments and fractures. I need to look into it a bit more, I haven't had any of mine come back for a remake. It seems to me there would be more trouble with the solid zirconia v.s the Ti base. Monolithic screw retained may be...

    October 14, 2013 · 2

    Scott,
    Dr. Giordano referenced some research being done by Dr. Rella Christensen @ TRAC Research... said...See more

  • Aubrey Williams Implants

    Has anyone has seen this scenario before? We have a implant supported 3 unit bridge that has come in, #10 is a Keystone implant and #12 is a Nobel. Any thoughts on the potential problems that might arise from this? We haven't seen a case with mixed implants before and are curious if anyone has heard of or seen this before.

    March 21, 2013 · 4

    Thanks for the posts in regards to the multiple implant systems. We have since completed the case. Made...See more

  • Aubrey Williams Implants

    Has anyone has seen this scenario before? We have a implant supported 3 unit bridge that has come in, #10 is a Keystone implant and #12 is a Nobel. Any thoughts on the potential problems that might arise from this? We haven't seen a case with mixed implants before and are curious if anyone has heard of or seen this before.

    March 21, 2013 · 4

    There should not be any problems with this. We have done many cases similar...just modify the 2 stock abutments to be parallel.

  • Robert Kelly, Jr., CDT The BRIDGE

    I'm planning to buy a scanner this year. What are the most important things I need to know to make an informed choice? What are the differences in the red laser ,blue laser, and the white light scanners?

    March 13, 2013 · 3

    We use a 3Shape D800, a NobelProcera and a LavaST. These three cover all ranges of advertised scanning...See more

  • I do a lot of opaqued Ti abutments, & have okay results. I'd like to do better than okay . I'll be there Fri morn.

  • Alwyn Naraine, CDT The BRIDGE

    This is just me venting.. (in hopes of gaining manufacturers attention). It really frustrates me to know that all major implant companies and non associated milling centers are heavily advertising "Custom Abutments". We do 100% percent of our implant restorations using custom made prosthesis, with 90%...

    February 1, 2013 · 4

    Yes, Please enlightening me... I'm ignorant about the legislative aspect. I fell that the true intentions...See more

  • Haitham Sharshar, DDS Abutments

    Dear sir , Excuse me for my question which may be silly ...but iam Egyptian dentist searching for doing my master degree on custom made abutments ..I need to ask simple questions 1-After I contact some labs in Egypt.. Zirkonzhan & laserdenta told me that they could do it with titanium base ...through...

    January 7, 2013 · 1

    Dear Sharshar, You can create custom abutments with Cad Cam technology; Procera Piccolo is a scanner...See more

Show More