Find Everything Abutments on The BRIDGE!
The BRIDGE is an online network from LMT dedicated exclusively for members of the Dental Laboratory community. Join free to learn more about Abutments and other topics.
Steve Braykovich · Jan 20, 2014 · Jan 20, 2014 · 2 minute read
How long does it take your mill to machine a (insert restoration type here)? This seems to be an area that the digital dental labs and milling centers are most concerned with and can likely be a key...
Tim Tyndall, CDT · Feb 15, 2012 · Feb 15, 2012 · 2 minute read
For the last three years, I've been involved in titanium research and development with Precision Milling Center in West Valley City, UT, and read with interest Luke Kahng's recent article on titanium (How to Fabricate an Esthetic Porcelain to Titanium Restoration, LMT November/December 2011,
Some shots of a custom abutment fresh off the Versamill. Not perfect but margins and finish looks pretty...See more good and we're getting right down to the interface nicely.
We've been trying out some new tooling and it gave me a chance to check out my new camera: Canon 70D w/ 100mm macro lens and flash ring.
Still dialing it in (both tooling and camera) but so far very happy with both. Pretty nasty case really but anybody can do the easy stuff.
Is there anyone familiar with designing custom abutments with Sirona's inLab 4.2? We are having an issue...See more we don't seem to have a solution to, and just wondered if we're missing a step or something. We follow the steps to the letter that I learned at one of the advanced courses. Also, with the TiBase and scan body, I make sure the little ridge on the tiBase/post faces toward the buccal, and align the scan body appropriately to it. We then continue to design the case as one normally would. The issue comes after milling when somehow the little groove made in the abutment to slide down on the little ridge of the TiBase is in the wrong place and when seated results in an abutment and crown turned at least a quarter turn - even though it appears on the buccal on the screen when designing. We are baffled, and can't seem to find anyone who knows either. Any ideas? — tagged Abutments and inLab Software 4.2
Our Technical Director and bar milling expert will be at LMT Lab Days East, April 5th in booth R-2
WorkNC...See more Dental CAM software can be used for soft materials, metals, abutments, bars and more. Check us out.
Best of all,m we'll happily give you our information we have gathered on the best way to star implementing CAM into dental, including doing implants.
Hello kent and everyone, I'm starting to hear about problems with zirconia abutments and fractures. I...See more need to look into it a bit more, I haven't had any of mine come back for a remake. It seems to me there would be more trouble with the solid zirconia v.s the Ti base. Monolithic screw retained may be the best way to go for posteriors, emax or zir as long as it has the Ti base. Any thoughts? Hey Kent, congrat's on the new position. — tagged Zirconia, Abutments and Kent Kohli, CDT
Bleach denture tooth shades More natural-looking denture teeth Advances in thermoplastics Improvements in acrylic teeth Colored clasps
LMT Original Research © 2010 - 2012