Argen Hosts "The Future of Digital Dentistry" Seminar Featuring Guest Speaker Dr. Gordon Christensen
The Argen Corporation will be hosting a seminar, The Future of Digital Dentistry, featuring guest speakers Dr. Gordon Christensen and Dr. Bob Lowe. This event will take place on Wednesday, November 19, 2014 from 9:00am to 4:00pm Pacific Time at the Hilton San Diego Resort and Spa.
Dental Technology Solutions, Whip Mix’s outsource service has expanded its offerings to include Vericore titanium and zirconia custom abutments. The Vericore Zirconia Hybrid Custom Abutments provide the natural esthetics of zirconia with the precision & durability of a titanium interface. The Vericore Premier Titanium Custom Abutments are polished and engraved with tooth number. A titanium platform and screw are included with each custom abutment. Available in 19...
- August 2013
In July, DATRON Dynamics—the North American representative of DATRON AG high-speed machining centers and 5-axis dental mills—officially opened its new Technology Center in Livermore, CA, just outside San Francisco.
"We have a significant West Coast customer base and it's growing,"...
Is there anyone familiar with designing custom abutments with Sirona's inLab 4.2? We are having an issue...See more we don't seem to have a solution to, and just wondered if we're missing a step or something. We follow the steps to the letter that I learned at one of the advanced courses. Also, with the TiBase and scan body, I make sure the little ridge on the tiBase/post faces toward the buccal, and align the scan body appropriately to it. We then continue to design the case as one normally would. The issue comes after milling when somehow the little groove made in the abutment to slide down on the little ridge of the TiBase is in the wrong place and when seated results in an abutment and crown turned at least a quarter turn - even though it appears on the buccal on the screen when designing. We are baffled, and can't seem to find anyone who knows either. Any ideas?
From Whip Mix's Dental Technology Solutions, the Vericore Zirconia Hybrid Custom Abutments provide...See more the natural esthetics of zirconia with the precision and durability of a titanium interface.
Thanks to everyone that came out to visit us last week. We had a great time and after a rocky start (long...See more flight delays and freight company loosing our exhibit materials) and a great show.
I was VERY encouraged and somewhat surprised (based on some of the claims being made) by just how far ahead we were in the machining of custom abutments; specifically Ti pre-milled (we use NT-Trading Preform with our own much enhanced libraries). Cycle time, finish, margin quality, completeness of machining and our ability to hand a very wide variety of severe abutment designs had customers confirming our position and coming back for more...and we're just warming up! A whole lot of surprises coming up soon.
A couple of pic's snapped by a cell phone just before the start of day 2. The t-shirts were a big hit. I was worried that visitors wouldn't "get it". They got it alright... :-)
Hello all you Bridgers!
We are only 9 days away from a very exciting 1 and 1/2 days of education, new...See more product information and industry fellowship. I have been coming to this meeting from the beginning and for one am really looking forward to this years meeting. Take a look at your February issue of LMT to get all of the information for the clinics being presented and the exhibitors who will be there to show you what's new and answer your questions. Just as a reminder, I wil be presenting two "Free" seminars on Saturday, February 22, 2013 from 7:30am - 8:30 am or 8:30 am - 9:30am. The subject is "Evolution of Outsourcing: CAD/CAM, Custom Abutments - How does this fit into your business model"? It is getting more difficult to gain new accounts and I may have a few ideas for you which will be discussed during this program. Come join us, there is No Charge and you will get 1-Scientific CDT credit for attending! Hope to see you there.
The desire for personal service and easy communication is one of the reasons 79% of LMT’s 2013 Dentist Survey participants don't want their work outsourced overseas.
LMT Original Research © 2010 - 2012