• September
  • Sep25
    Introduction to Stain & Glaze Techniques For Dental Offices

    Seminars/Clinics · Interdisciplinary Dental Education Academy (San Francisco)

    One of the biggest challenges in today’s CAD/CAM practice is to produce anterior restorations that are not only functionally correct, but also esthetically pleasing. The objectives of the course are to provide theoretical and hands-on training in staining and glazing techniques of chairside ceramics...

    Foster City, CA
    Thursday Sep 25
  • Sep26
    Zenostar Esthetic Workshop

    Seminars/Clinics · Interdisciplinary Dental Education Academy (San Francisco)

    This module provides detailed training on the use and understanding of ceramic materials to be used with the Zenostar®zirconia. During this hands-on training, participants will perform the steps for glazing full contour zirconia restorations as well as layering using IPS e.max® Ceram. Specific...

    Foster City, CA
    Friday Sep 26
  • October
  • Oct2-3
    Smile Design Workshop Featuring IPS E.max - Korean

    Seminars/Clinics · Davinci Dental Studios

    Note: *This course is instructed in Korean* This two day e.max Workshop is designed to provide advanced layering concepts for individuals who are working with lithium disilicate restorations. This course, which features IPS e.max Press or CAD substructures, has been developed for ceramists that are experienced...

    Canoga Park, CA
    Oct 2-3
  • Oct3
    Introduction to Stain & Glaze Techniques For Dental Offices

    Seminars/Clinics · Ivoclar Center for Dental Education (Amherst)

    One of the biggest challenges in today’s CAD/CAM practice is to produce anterior restorations that are not only functionally correct, but also esthetically pleasing. The objectives of the course are to provide theoretical and hands-on training in staining and glazing techniques of chairside ceramics...

    Amherst, NY
    Friday Oct 3
  • Oct6-8
    Introduction to the ZenoTec mini Milling System

    Seminars/Clinics · Wieland (Troy)

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Troy, MI
    Oct 6-8
  • Oct6-8
    Introduction to the ZenoTec Mini Milling System

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Mississauga, CAN
    Oct 6-8
  • Oct9-10
    Introduction to IPS E.max Press Technology

    Seminars/Clinics · Ivoclar Center for Dental Education (Amherst)

    The Fundamentals of Press Technology Course covers the fundamentals of the IPS e.max technique including IPS e.max components for pressing (IPS e.max Press and IPS e.max ZirPress) and IPS e.max Ceram for the Cutback and Layering Techniques. Additional topics covered are: patient-dentist-laboratory communication...

    Amherst, NY
    Oct 9-10
  • Oct10
    Press Layering Workshop Featuring IPS E.max

    This one day Press Technology Workshop is designed to provide the next level of training following our introductory press course. This course has been developed for ceramists that are experienced in the fabrication of All-Ceramic restorations and will feature IPS e.max Press materials. Attendees will...

    Mississauga, CAN
    Friday Oct 10
  • Oct13
    Zenostar Esthetic Workshop

    Ivoclar Center for Dental Education (Amherst)

    This module provides detailed training on the use and understanding of ceramic materials to be used with the Zenostar®zirconia. During this hands-on training, participants will perform the steps for glazing full contour zirconia restorations as well as layering using IPS e.max® Ceram. Specific...

    Amherst, NY
    Monday Oct 13
  • Oct16-17
    Master IPS e.max Technology with Brad Jones, CDT, featuring IPS e.max Press

    Interdisciplinary Dental Education Academy (San Francisco)

    This hands-on course will teach the participants cutting edge step-by-step techniques and procedures that will take their work to the next level. They will learn how to mimic a natural tooth from the inside out giving life to their ceramics while surpassing their doctor’s and patient’s expectations. Learning...

    Foster City, CA
    Oct 16-17
  • Oct23-24
    Smile Design Workshop Featuring IPS e.max (Press or CAD/CAM)

    Seminars/Clinics · Ivoclar Center for Dental Education (Amherst)

    This two day e.max Workshop is designed to provide advanced layering concepts for individuals who are working with lithium disilicate restorations. This course, which features IPS e.max Press or CAD substructures, has been developed for ceramists that are experienced in the fabrication of All-Ceramic...

    Amherst, NY
    Oct 23-24
  • Oct25
    Esthetics for the Ceramist; Work-Arounds for Common Restorative Issues

    Sheraton Reston Hotel

    As the dental market continues to shift it is imperative that case challenges can be analyzed and a material solution or process can be utilized, providing a cost effective and esthetic smile. For all-ceramics it may be the challenge of masking a dark preparation or for modern PFM cases the lack of space...

    Reston, VA
    Oct 25 8:00 am to 5:00 pm
  • November
  • Nov3-5
    Introduction to the ZenoTec mini Milling System

    Seminars/Clinics · Wieland (Troy)

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Troy, MI
    Nov 3-5
  • Nov3-5
    Introduction to the ZenoTec Mini Milling System

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Mississauga, CAN
    Nov 3-5
  • Nov6-7
    Smile Design Workshop Featuring IPS e.max (Press or CAD/CAM)

    Seminars/Clinics · LVI Las Vegas

    This two day e.max Workshop is designed to provide advanced layering concepts for individuals who are working with lithium disilicate restorations. This course, which features IPS e.max Press or CAD substructures, has been developed for ceramists that are experienced in the fabrication of All-Ceramic...

    Las Vegas, NV
    Nov 6-7
  • Nov8-9
    Ceramic: Light & Design

    Pizzi Dental Studio

    Hands-On Course Description: In this two day hands-on course Peter Pizzi, CDT, MDT will use natural teeth and photos to discuss proper layering with metal ceramics while creating an understanding of how to translate what we see in nature into our restorations. Peter will show you how to create a working...

    Staten Island, NY
    Nov 8-9
  • Nov15-16
    Implants: The Pink and White

    Pizzi Dental Studio

    Hands-On Course Description: Implants are not only the fastest growing segment in dentistry they are also the least price sensitive and most immune to off-shore competitors. In fact, many dental laboratories continue to see robust demand for implant-supported restorations and many also believe that a...

    Staten Island, NY
    Nov 15-16
  • December
  • Dec1-3
    Introduction to the ZenoTec mini Milling System

    Seminars/Clinics · Wieland (Troy)

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Troy, MI
    Dec 1-3
  • Dec1-3
    Introduction to the ZenoTec Mini Milling System

    This course consists of three 1-day modules offering comprehensive training for the Zenotec® Milling System.   Module 1 - Scan/Design Training. This module provides specific introductory training for the 3Shape scanners and design software. Training is one-on-one hands-on using the specific...

    Mississauga, CAN
    Dec 1-3
Show More